H1+ Updates

Available firmwares:

For H1+ from serial number H1-0381 onward: H1plus_2.0

This firmware enables better InControl integration.

- Firmware version check through the InControl app

- DMD cable connection mode separated for more reliable connection on both Bluetooth and Cable modes

- F1 mode commands are set for InControl app.

Firmware installation:

SilverFox controllers utilizes a Wifi-firmware update protocol.

Installation steps:

1. Download the latest firmware (and un-Zip it).

2. Make sure the unit is not powered.

3. Press and hold [Centering] (the top most button) and Joystick [Left].

4. Switch on the power while still holding the buttons/joysticks.

5. Hold the buttons for about 3 sec. You can now release the buttons. The LEDs will blink rapidly for WiFi-mode.

6. Connect to WiFi network "SilverFox_wifi" from your tablet, mobile phone, or computer. (password is "silverfox").

7. Open your browser and type address 100.100.100.100/update.

8. Select the firmware file and press "Update".

9. Wait for progress bar to move 100% for a few seconds.

10. Cycle the power and your Silverfox is up to date.