FIRMWARE Installation
C1 and C2 controllers
Updates
Available firmwares:
SilverFox C2 firmware update
This firmware enables better InControl integration.
- Firmware version check through the InControl app
- DMD cable connection mode separated for more reliable connection on both Bluetooth and Cable modes
- F1 mode commands are set for InControl app.
in C2_1.2 version
- Bluetooth register reset when entering to wifi-mode
Firmware installation:
SilverFox controllers utilizes a Wifi-firmware update protocol.
Installation steps:
1. Prepare the latest firmware (and un-Zip it).
- open the zip-folder and copy the .bin file to the
location where to find easily (desktop or
downloads folder for example)
2. Make sure the unit is not powered.
3. Hold Left joystick (or switch) to right and Right joystick to the left at the same time.
4. Switch on the power while still holding about 3 seconds.
5. LEDs will blink rapidly for WiFi-mode.
6. Connect to WiFi network "SilverFox_wifi" from your tablet, mobile phone, or computer. (password is "silverfox").
7. Open your browser and type address 100.100.100.100/update.
8. Select the firmware file and press "Update".
9. Wait for progress bar to move 100% for a few seconds.
10. Cycle the power and your Silverfox is up to date.